Working principle: Normal cases, heat conducting oil pump start before the pump shell and the suction pipe shall be filled with liquid, when the prime the pump shaft and the impeller rotates, the blade between the liquid and spins, the liq

Several main classification methods are introduced. 1. Classification according to impeller class (1) There is only one impeller on the pump shaft of single-stage heat conduction oil pump. Because the fluid only has one chance to increase

The model is a code characterizing the performance characteristics. The model system of heat conduction oil pump products in China is composed of three parts. Its composition is as follows: The first part represents the suction inlet diame

Rolling bearing According to different friction properties, bearings are divided into rolling bearings and sliding bearings. Rolling bearing plays a very important role in heat conduction oil pump, it is mainly used to support the rotor. 1

1. The advantages (1) Heat conduction oil pump and growth box are generally closed structure, which can be installed and used in the open air. (2) compact structure, small volume, small quality, convenient maintenance. (3) The use of open

1. Disassembly sequence 1) Drive device disassembly (1) Disassemble the power cord of the motor or the inlet and outlet pipe of the steam turbine. (2) Remove the coupling. (3) Remove the connecting bolt between the drive and the gear box,

The hot oil pump shall be inspected, measured and assembled according to the requirements of the pump operation and maintenance manual during the disintegration process or after the parts are removed and cleaned. LMV/BMP-311, LMV-311 and L

On the status quo and research significance of Pump equipment manufacturing industry in China: Pump equipment manufacturing industry is one of the largest industrial categories in China, which consumes more energy, raw materials and pollut

Maintenance of heat conduction oil pump seal 1 pump with a wide variety of mechanical seals, different models, but there are five main leakage points: (1) the seal between the shaft sleeve and shaft; (2) the seal between the moving ring an

Some customers are using thermal oil pump for the first time, so what are the precautions when using thermal oil pump for the first time? Here is a brief description, I hope you can get help: Start and debug the pump The test run of the pu