The oil pump plays an important role in loading, unloading and reverse transportation. According to different oil products, different oil pumps are selected. The following is a brief description of the daily maintenance and maintenance work of several commonly used oil pumps:
A: diesel and gasoline loading and unloading as far as possible to choose copper wheel diesel pump, so that the explosion-proof effect is better. Before the first boot, try to pour some gasoline or diesel into the pump body, so that the pump can run better. If the noise is found to be large, then check whether the bottom Angle bolt is loose. And the pump bearings are regularly refueled, the machine seal leakage is replaced by the machine seal, if it is a packing seal, then twist the bolt, it is best to have several sets of seals for emergency use.
Two: transmission lubrication pump, this pump generally choose gear pump or screw pump, because the viscosity is relatively large, but this pump is not easy to damage, because the lubricating oil is better, can rely on its own lubrication to maintain a good running state. Try not to idle, if it is an external bearing, then add lubricating oil regularly to prevent bearing damage.
Three: when conveying materials with higher viscosity, such as epoxy resin, try to choose the most appropriate epoxy resin pump, determine the number of revolutions, the pump price is generally more expensive but the effect of use is the best. This pump is equipped with a reducer motor, not only to regularly maintain the pump, but also to maintain the reducer motor, add lubricating oil, often detect the pump pressure, filter is plugged. They have to be checked on a regular basis.
I hope the above points can help you. The article is written by Botou Haina Oil pump. If reproduced, please reserve the author.
